2019 Can-Am Ryker | First Ride Review

Can-Am Ryker
After the success of its SeaDoo Spark project, BRP/Can-Am has launched a customizable, affordable, fun to ride entry-level 3WV called the Ryker. (Photos by Kevin Wing)

This is a review of a Can-Am 3WV (three-wheeled vehicle). Cue the snarky comments. It’s not a motorcycle, they say. Well, they’re right…and Can-Am agrees.

The Spyders–and the new Rykers–aren’t motorcycles, and if you approach them expecting a two-wheeled experience of course you’ll be disappointed. Your only expectation should be to have fun.

The Rykers make no attempt at two-wheeled pretense; they don’t even have a key–at least not the metal kind we’re all familiar with. Instead they use a plastic D.E.S.S. (Digitally Encoded Security System) key as seen on Can-Am’s SkiDoo and SeaDoo products.

Advertisement

This small device has a socket that snaps on over a ball on the left side of the Ryker’s engine compartment and is digitally encoded to each machine, which also means it’s possible to have one key coded to all of your Can-Am toys.

Can-Am Ryker
The low-slung Ryker 900 comes standard with red, black or yellow body panels that snap on and off for easy customization.

So why do motorcycle magazines continue to cover these three-wheeled insults to “real” riding?

The short answer is: not everyone is comfortable with the idea of two wheels, but they still want the saddle, handlebar, wind-in-your-hair experience, and we don’t blame them–it’s fun.

Can-Am figured this out and about 10 years ago introduced its first Spyder, with two wheels up front for better stability than traditional trikes.

It was a learning experience, with hits and misses along the way, culminating in the current Spyder lineup of six F3 and RT models, all powered by a Rotax 1330 ACE in-line triple…and costing anywhere from $16,000 to $27,000. There were less expensive models in the past but they weren’t always well received, and the used market is sparse.

Therefore, while Can-Am now operates dedicated Rider Education Programs in 37 states (with a goal of 42 by the end of 2018), it’s struggling to convert graduates to buyers. According to its research, 45 percent of participants are not purchasing a Spyder because they’re just too expensive.

So Can-Am has instituted a new strategy it calls Project S, which takes a four-pronged approach: reduce the price of the Spyder F3 and RT models, continue to expand the Rider Education Program, introduce the industry’s first leasing program and bring two new entry-level models to market, the $8,499 Ryker 600 and $9,999 Ryker 900.

With 10 years of experience and some amortization of development costs, plus overall cost reductions for technology, Can-Am’s designers and engineers feel like the Rykers are the entry-level 3WVs they’ve always wanted to build.

Can-Am Ryker
For my ride I adjusted the footpegs to roughly the halfway point along the frame rail, while I slid the handlebar all the way forward for optimum control in the twisties. For reference, I’m 5-feet, 9-inches tall with a 34-inch inseam.

Jenny’s Gear
Helmet: Bell Star MIPS
Jacket: Olympia Janis
Jeans: Tobacco Motowear
Boots: Dainese Bahia

Other than engine configurations the two Rykers are identical, and look a bit like a stripped-down Spyder, with matte-black plastic composite bodywork and a low, stubby saddle suspended over the single-sided swingarm that houses a driveshaft.

Gone is the belt that drives the Spyders’ rear wheels, which Can-Am says was necessary to create a lower center of gravity; the lower shaft allows the seat to hang just 23.5 inches off the ground. With weights in the low-to-mid 600-pound range, the Rykers also weigh about 300 pounds less than the sporty Spyder F3.

The handlebar and footpegs are adjustable thanks to a next-gen version of Can-Am’s UFit system that is quick, easy and requires no tools.

To move the handlebar, lift the clamp, slide it forward or back to your desired position, then re-clamp. The footpegs are similarly easy: lift, slide along the frame tube, lower back into place.

Thanks to a pretty ingenious design, the brake reservoir slides along with the right peg, and the lever itself is also easily adjustable with one hand; at one red light I reached down and adjusted both footpegs before the light turned green.

Can-Am Ryker
Customized fit is something riders have been begging for, and Can-Am has figured it out. For example, the handlebar slides forward and backward; just lift the clamp to adjust. No tools required!

Once wrapped around the low-slung machine, getting started is a matter of twisting the throttle. The Rykers’ CVT requires no shifting and dishes out power at any time; the belt does require service at a BRP dealer every 12,500 miles or so.

Reverse is a simpler affair than on a Spyder; while stopped, use your left foot or hand to slide a lever above the footpeg to the rear. Perform the opposite maneuver to return to forward gear.

Can-Am offers the standard Ryker with either a Rotax 600 ACE parallel twin or a 900 in-line triple, while the up-spec and dirt road-ready Rally Edition comes with the 900 and features all-road tires, KYB suspension with an extra inch of travel, reinforced wheels, an included Max Mount rear rack, skid plates and structural enhancements, hand guards and an extra Rally ride mode. Both variations can be customized with snap-on body panels and other accessories.

Can-Am Ryker
I chose a Rally Edition with yellow panels, but this tri-color Limited Edition scheme caught my fancy as well.

I’ve had experience with the F3 Limited and RT, and am well aware of the capabilities and limitations of both Spyder designs, namely their high center of gravity that causes the VSS (Vehicle Stability System) to kick in early enough to put a bit of a damper on true hooliganism.

The Rykers, by contrast, were designed specifically for hooning around, and the 900 is the first 3WV I’ve ridden where I actually had to dial myself back because the VSS was allowing me to act too much the fool.

It takes a bit for a motorcyclist used to two-wheelers to get in the 3WV swing of things, but once figured out it’s like riding a go-kart with a handlebar.

Can-Am Ryker
Holy drifts and burnouts, Batman! The Ryker is actually a heck of a lot of fun to ride–just don’t try to turn it into a motorcycle experience. It’s more like a go-kart with a handlebar.

Riders can choose their own level of adventure with three riding modes: Eco, Standard and Sport (and a fourth, Rally, on the Rally Edition). Standard is fine for casual riding or those new to 3WVs, while Sport dials things up a notch by almost completely disabling traction control and loosening VSS intervention.

Standing burnouts and sliding into corners, your butt less than two feet from the tarmac, are encouraged.

Rally mode takes things even further to allow for some pretty serious off-road drifts, but after scaring myself several times on an extremely twisty canyon road I decided that it would be wise to save it for the dirt.

Also notable was the fact that the standard Ryker, with its lower ride height and stickier street tires, was quicker on those technical roads than the Rally Edition. When pushed hard into a turn in Sport mode, the Rally’s “all-road” front tires had a tendency to break loose, sending me skittering across my lane with the dialed-back VSS sputtering to intervene at such a late juncture.

Can-Am Ryker
Hard into a corner, notice the inside tire is barely skimming the ground, its shock completely extended, while the outside tire is taking the brunt of the traction demands, its shock totally compressed. The Rally’s all-road tires gave up a little early for my liking, as our ride leader on a street-tired standard Ryker gradually pulled away.

Once traction was regained, the engine stepped up to slingshot me out of the corner. Despite its lack of a counterbalancer, I found the Rotax 900 ACE triple to be smooth and responsive, if somewhat lacking in character.

It generates a claimed 77 horsepower at 7,100 rpm and 56 lb-ft of torque at 6,300, delivered via a well dialed-in electronic throttle and a CVT that offered it up on demand for quick passes and scooting around the twisties.

Unfortunately a Ryker 600 was not available on our ride, but given that it only weighs about 20 pounds less than the Ryker 900 and makes nearly 40 percent less power (47 horsepower at 7,300 rpm and 35 lb-ft of torque at 6,200), we’re guessing most dealers will only keep one on hand to upsell customers to the bigger engine.

Can-Am Ryker
Under the “hood:” battery, coolant and steering linkage is all easily accessible.

Linked triple-disc brakes were up to the task, although at our spirited pace a solid push on the pedal was necessary to haul the roughly 660-pound Ryker Rally down to a (relatively) safe corner entry speed. You feel it when the ABS intervenes, but by that point you’ll probably be happy it’s there.

Suspension (Sachs twin-tube coil-over shocks on the standard Ryker and adjustable KYB HPG shocks on the Rally) is impressive, as it is on the Spyders. With a 3WV one often can’t avoid potholes and other road hazards, but the Ryker soaks them up with very little fanfare.

My Rally wallowed just a bit on quick transitions, but I hadn’t gotten an opportunity to make any adjustments so it might be possible to stiffen it up a bit for sport riding.

I also appreciated the Ryker’s lack of power assist steering like that found on the Spyder models. Now connected directly and mechanically to the front wheels, the Ryker exhibits much less of the skittery, nervous behavior many riders have noted on the Spyder.

The upshot is a slightly harder workout when flinging it through the twisties, but it’s a fair trade in my opinion.

Can-Am Ryker
A sharp-looking single-sided swingarm shows off the Ryker’s rear wheel.

The lower center of gravity and substantial weight loss over the Spyders is noticeable, and the Ryker feels playful and fun—exactly what Can-Am was hoping for.

What remains to be seen is how well it’s received by its target market, but the new leasing program, which advertises payments on a Ryker as low as $149/month, might provide an added incentive for a generation unlikely to have a large chunk of savings to plunk down on a new toy.

Even seasoned two-wheelers (and trike riders) looking for something fun to bomb around town on should give the Ryker an open-minded look though. You never know, you just might like it!

The 2019 Can-Am Ryker starts at $8,499 for the 600cc base model, the 900 is $9,999, and the Rally Edition is $10,999. The base price includes one of three colors, black, red or yellow, with other optional colors and graphics available for an upcharge, including a limited-edition series that will change every six months or so.

They should be arriving in dealerships sometime in Spring 2019.

Check out Rider’s Guide to New/Updated Street Motorcycles for 2019

Can-Am Ryker
Simple, comprehensive LCD means a shorter start-up time than the tech-heavy Spyders. Drive (forward, reverse and parking brake) is in the upper right, with things like speed, odometer/tripmeter, fuel consumption data, fuel level and ride mode displayed as well.

2019 Can-Am Ryker Specs
Base Price: $8,499 (Ryker 600)
Price as Tested: $10,999 (Rally Edition 900)
Website: can-am.brp.com
Engine Type: Liquid-cooled in-line triple, DOHC, 4 valves per cyl. (as tested)
Displacement: 900cc (as tested)
Bore x Stroke: 74.0 x 6.7mm
Transmission: CVT (automatic)
Final Drive: Shaft
Wheelbase: 67.3 in.
Seat Height: 24.2 in. (as tested)
Claimed Dry Weight: 627 lbs. (as tested)
Fuel Capacity: 5.28 gal.
Avg. MPG: NA

33 COMMENTS

  1. 47 horsepower

    A2 compliant. That’s the raison d’etre of the 600. Frankly, I’m a bit surprised at the fairly low HP of the 900, I’m guessing they engineered for a broad powerband, given both the weight and the CVT.

  2. Excellent piece — thanks from the UK. We have an F3 Spyder (three years now) and it’s the perfect winter motorcycle, completely unflappable and unfalloffable. Goes excellently with the 4 H-D twins and a pile of assorted ancient Brits. As you say about the riding experience; madly entertaining regardless of the weather and road surface, but not a motorcycle. Perfect partners for those who don’t want to use a car much.
    Soon’s they land in the UK I’ll borrow one.

    • They offer a “2 up” rear spring for the standard ryker to accommodate 2 riders. Not sure if it fits the rally edition, but if the KYB upgrade is only the shocks.. it may.

  3. Anyone else nervous about BRP’s first foray into a shaft drive vehicle? That’s the part of the tech on these machines that gets my attention. Shaft Drive is easy to be not well engineered, or implemented. Reading this, I’m now not overly concerned about the gear ratios being chosen correctly (it reads above as they are well chosen), but I am concerned about an engineering dept. getting a first shaft drive correctly engineered for loading and reliability, and then spec’ing parts that will allow for longevity and reliability. I really need to hear more about these issues from folks who have first hand knowledge of BRP’s shaft drive design.

    The DESS system is not a great selling point, either. BRP / Can Am continues to have reliability issues with this system, as reported by members of the Spyder online forums. This is a well documented headache area, and so I’m not pleased it’s on this machine.

    • Dude BRP has been using driveshafts for a while on their offroad vehicles. they already have experience with this. i live 2 miles from their R&D facility and know lots of people working there

  4. Try to find the front tire size: 145/60r16. No one makes them. They’re not even in the Kenda catalog yet. Can Am is promising two different Kenda tires of this size, “standard” and “rally”. We’ll be over a barrel trying to get them, and I’m sure at a premium price.

    • not true. the tires for Spyders are also only available at Can-AM dealers, no aftermarket companies offer a replacement, and yet they are very reasonably priced.

  5. I am very interested in the Ryker. My wife is on her third Spyder and now loves the F3. As a motorcycle rider the F3 belt vibration drove me nuts and I refused to ride it. This new machine is shaft driven and I hope BRP gets it right. All 4 of my motorcycles are shaft driven

    The Ryder looks great, with a decent price point and can’t wait to jump on one and give it a try/but.

    • $$$. CVT transmission is so much less expensive to manufacture, lighter, and much easier to use. It seems like Can-Am is making this the Easiest bike to operate. Ever.

    • Do you really want their “Semi-Auto” drivetrain from the spyders? I’d rather have it drive like a snowmobile (CVT) than have a semi-automatic with push button upshifts and automatic downs.

  6. I just rode the Rally edition today, I’ll be an owner in a matter of a couple months. Very quick, steering effort was light. Once you take the class these are very simple to ride and the Ruler is very no frills but all fun!!

  7. Anxiously awaiting it’s release, I’m waiting on my 900 rally edition. Can someone give it to me straight?… I weight 170 lbs. What will my top speed be on the open road?

  8. Too bad Can-Am can’t use the snowmobile motors in these.
    A 600cc snowmobile absolutely RIPS and is north of 120hp.
    I’ve ridden the prototypes many years ago before Spyders were even sold the the public. They have come a LONG way and are a blast to ride.

  9. We checked this out at the motorcycle show recently and were appalled at how cheaply they are made.

    The handlebars are held in place by a flip-up tab on a type of C-channel that has detentes stamped into it. The channel is poorly finished and the exposed edges are quite sharp. Better hope you’re wearing more than a T-shirt if the tab loosens on a sudden stop.

    Other parts exhibit the same level of fit and finish. I’d give this thing a wide berth.

  10. I’m excited! 😂 my Ryker 900 will be in first week of April! Rode bike years ago however after a spill I stopped riding…for me this is going to be fun! Great for all ages…young, older kids, men, women…. and they are making this totally affordable with financing options!! See you all out there this summer…stay safe👍

  11. Great idea, great vehicle. Regrettably no hand brake for people with dodgy right legs and/or feet – that will eliminate many mature age and partly disabled riders. Cannot understand their thinking: no clutch, no gear shift, with CVT but with one foot brake pedal only. Why not go all the way like a scooter? I hope there will be a hand brake conversion option available?

  12. My boyfriend had the f3 spyder. Traded it in February 2019 for ryker. Just picked it up last Saturday. Then Wednesday we took it out and it blew up. The gears were grinding and it wouldn’t go. The transmission is toast with 40 miles. I’m so mad but he isn’t because he wanted it so bad. The seat for passenger is not comfortable at all!!!

  13. Hey Can Am!, Nice idea having an $8500 MSRP, except the greedy Fla. dealer with his mark up wants ?11,800 OTD. NO WAY!

    You could sell a lot if these, if it weren’t for the dealers getting in the way

  14. I am planning to buy the rally ryker edition with the passenger seat do you know if it can carry 2 people with ease and is it safe for both of us.

  15. Got my 900 ACE RYKER 2 months ago 2500, KMS on it. Its a nice Bike. Fast fun and Comfortable to ride good buy for the money. Put on the parking brake lock and the K&N air filter. Also CANAM sport grips much better than original.

  16. Bought our Rally last Tuesday. We already owned a Spyder RT-S SE5 since 2012. It is really fun to ride. Not a touring quality ride, but great to rip around on. Plenty of power. Direct steering feels great. Adjusting pegs and brake are a breeze. The single rider backrest was a must have for me but, at $199.95, a little pricey. Lots of accessories now from all the thrid parties. Drink holders, phone mounts, lock for parking brake and locking gas cap, were all on our shopping list.

    For metro cruising, a removable windshield is a nice addition. A small sport size does the trick, and makes a big difference at higher speeds.

LEAVE A REPLY

Please enter your comment!
Please enter your name here